S&B ULTRA PERFORMANCE AIR FILTER FOR Can-AM Defender 2016-2024 / Maverick Trail & Sport 2018-2024 / Commander 700 2022-2024

Using an exclusive dry synthetic media, the S&B PERFORMANCE air filter has a flow rate 6.56% higher than stock and provides 10.53% more air than the Donaldson filter.

Filtration is 30% more effective than a stock filter.

This brand new S&B PERFORMANCE filter is very easy to clean.

Simply follow the steps below to breathe new life into your dirty filter.

Compatible with:

• 2016-2024 Can-AM Defender
• 2018-2024 Maverick Trail & Sport
• 2022-2024 Commander 700

Maintenance protocol (example with the RZR):

STEP 1
First, make sure to wear protective goggles throughout the cleaning process. Remove the clogged air filter from the airbox and gently tap on the toughest parts to remove all debris, being careful not to bend the cage or pleats.

STEP 2
Blow the filter from the inside out using the nozzle at a minimum distance of 5cm from the filter. Continue moving the nozzle around, making sure not to focus on a specific area. Use a compressor at a temperature not exceeding 30 psi.

STEP 3
Use the nozzle to blow at an angle towards the outside of the filter to remove any large debris not eliminated in steps 1 and 2. Be careful not to spill debris into the airbox.

STEP 4
Clean the filter from the inside with water (garden hose)

Wash the outside of the filter to remove any remaining debris until the filter returns close to its original white color.

Allow the filter to dry before use. A small fan can be used to speed up the process. Do not use hot air.

Before reinstalling your air filter, carefully check that the cage, pleats, and silicone rubber are not damaged. If the cage, pleats, or rubber are damaged, DO NOT use the filter!

The filter can be cleaned and reused about ten times.