Cut-off switch RFX Race Series - OEM replica

Cut-off switch RFX Race Series - OEM replica

BRANDSRFX
EAN5056070604803
PROMO
was €21.00 Special Price €19.12
SKU
1128596
Out of stock
Brand Cylinder Model Year Caractéristique
SUZUKI 80 RM 80 1989
SUZUKI 80 RM 80 1990
SUZUKI 80 RM 80 1991
SUZUKI 80 RM 80 1992
SUZUKI 80 RM 80 1993
SUZUKI 80 RM 80 1994
SUZUKI 80 RM 80 1995
SUZUKI 80 RM 80 1996
SUZUKI 80 RM 80 1997
SUZUKI 80 RM 80 1998
SUZUKI 80 RM 80 1999
SUZUKI 80 RM 80 2000
SUZUKI 85 RM 85 2002
SUZUKI 85 RM 85 2003
SUZUKI 85 RM 85 2004
SUZUKI 85 RM 85 2005
SUZUKI 85 RM 85 2006
SUZUKI 85 RM 85 2007
SUZUKI 85 RM 85 2008
SUZUKI 85 RM 85 2009
SUZUKI 85 RM 85 2010
SUZUKI 85 RM 85 2011
SUZUKI 85 RM 85 2012
SUZUKI 85 RM 85 2013
SUZUKI 85 RM 85 2014
SUZUKI 85 RM 85 2015
SUZUKI 85 RM 85 2016
SUZUKI 85 RM 85 2017
SUZUKI 85 RM 85 2018
SUZUKI 125 RM 125 1989
SUZUKI 125 RM 125 1990
SUZUKI 125 RM 125 1991
SUZUKI 125 RM 125 1992
SUZUKI 125 RM 125 1993
SUZUKI 125 RM 125 1994
SUZUKI 125 RM 125 1995
SUZUKI 125 RM 125 1996
SUZUKI 125 RM 125 1997
SUZUKI 125 RM 125 1998
SUZUKI 125 RM 125 1999
SUZUKI 125 RM 125 2000
SUZUKI 125 RM 125 2001
SUZUKI 125 RM 125 2002
SUZUKI 125 RM 125 2003
SUZUKI 125 RM 125 2004
SUZUKI 125 RM 125 2005
SUZUKI 250 RM-Z 250 2004
SUZUKI 250 RM-Z 250 2005
SUZUKI 250 RM-Z 250 2006
SUZUKI 250 RM 250 1989
SUZUKI 250 RM 250 1990
SUZUKI 250 RM 250 1991
SUZUKI 250 RM 250 1992
SUZUKI 250 RM 250 1993
SUZUKI 250 RM 250 1994
SUZUKI 250 RM 250 1995
SUZUKI 250 RM 250 1996
SUZUKI 250 RM 250 1997
SUZUKI 250 RM 250 1998
SUZUKI 250 RM 250 1999
SUZUKI 250 RM 250 2000
SUZUKI 250 RM 250 2001
SUZUKI 250 RM 250 2002
SUZUKI 250 RM 250 2003
SUZUKI 250 RM 250 2004
SUZUKI 250 RM 250 2005
SUZUKI 450 RM-Z 450 2005
SUZUKI 450 RM-Z 450 2006

Description

Tonnycat vous propose :
Cut-off switch RFX Race Series - OEM replica de RFX

The RFX Race Series circuit breakers are OEM replacement parts.

Complete with the same fittings, fastenings, connectors, and cable lengths as the original part.

Available for a wide variety of motorcycles.

Features:

  • OEM replacement
  • Accepts all original connectors
  • OEM cable length

Installation instructions:

  • Start by removing the front plate.
  • Carefully cut the cable ties holding the cables of the start and stop switch on the handlebar, then unscrew the clamps and let them hang.
  • Locate the switch connector on the motorcycle, it is often close to the steering column on the frame but can sometimes be under the tank.
  • Detach the connector and remove the switch, noting the wiring path.
  • Clean the connector with an electrical contact cleaner.
  • Securely attach the new switch to the handlebar in the desired position.
  • Route the wires as for the old switch and assemble the connector.
  • Ensure the wires are not taut by turning the handlebar to full extension, adjust if necessary.
  • Reinstall the cable ties if possible by positioning the cables at the back of the handlebar to avoid damage from debris.
  • Put your front plate back in place.
BRANDSRFX
EAN5056070604803
Soyez le premier à poser une question sur ce produit !

Soyez le premier à poser une question sur ce produit !