RFX Pro FT Rear Brake Pedal

The RFX Pro Series brake pedals are designed and tested for use at the highest level.

The Pro Series brake pedals are made of 7075-T6 aluminum and feature an OEM-type forged axle. The smooth finish of the axle helps reduce wear associated with a serrated design.

The Pro Series flexible tips are made of CNC machined billet aluminum and feature a spring-loaded rotating tip that, in case of impact, such as in a rut, rotates to reduce damage. The tip also has sharp teeth to improve grip in muddy conditions.

The Pro Series flexible tips also incorporate a stopper on the rotating tip, which stops the tip at a 90-degree rotation, thus avoiding damage that can occur if the tip rotates under the clutch cover.

The Pro Series brake pedals also include a cable brake snake, which helps prevent the pedal axle from twisting in case of a collision.

Features:

• New solid billet 7075-T6 tip, with flow design.
• New 2-position adjustment on the tip.
• New optional version of hard anodized tip available for current models.
• New brake snake style with adjustable clamp.
• New hard anodized black shaft to prevent corrosion and reduce wear.
• Supplied complete with bearings and bushings for certain models.
• Laser engraved logo.

Assembly Instructions:

• Start by noting the height of the pedal end relative to the footrest.
• Remove the R clip or split pin from the rear of the brake bolt located behind the frame.
• Remove the pivot bolt that holds the pedal to the frame.
• Detach the pedal return spring and let it hang.
• Rotate the pedal outward to expose the split pin at the back of the pedal clevis.
• Remove this split pin and the locating pin, the rear brake pedal will now come off.
• Remove the oil seals from the old pedal, clean them, and place them back on the new pedal.
• Clean all parts with a multi-purpose lubricant such as Maxima MPPL, ready to be reinstalled.
• Reinstall the brake clevis, stop pin, and split pin.
• Reinstall the return spring.
• Apply Maxima waterproof grease to the pivot bolt, align the pivot hole and put the bolt back in place.
• Tighten the pivot bolt to the required torque as per the user manual.
• Reinstall the R clip/split pin at the rear of the pivot bolt.
• Once the pedal is secured, adjust the pedal height to achieve the correct position and play, by loosening the nut above the clevis and turning the plunger bolt in or out as needed.
• Now mount the brake snake.
• Japanese models - Remove the nut and washer from the lower engine mount, replace the old washer with the new washer that is attached to the brake snake.
• KTM models - Remove the new washer attached to the brake snake, set it aside as it is not needed on the KTM, loop the cable around the lower engine mount and place it back inside the crimp fitting.
• Adjust the correct tension on the brake snake, remembering to allow for pedal extension downward.
• Crimp the fitting using pliers and cut off the excess cable.

Compatible Vehicles

GAS GAS EC 250 F 250 2025
GAS GAS EC 250 F 250 2024
GAS GAS EC 350 F 350 2025
GAS GAS EC 350 F 350 2024
GAS GAS EC 450 F 450 2025
GAS GAS EC 450 F 450 2024
GAS GAS EC 500 F 500 2025
GAS GAS EC 500 F 500 2024
GAS GAS MC 125 125 2025
GAS GAS MC 125 125 2024
GAS GAS MC 250 F 250 2025
GAS GAS MC 250 F 250 2024
GAS GAS MC 350 F 350 2025
GAS GAS MC 350 F 350 2024
GAS GAS MC 450 F 450 2025
GAS GAS MC 450 F 450 2024
HUSQVARNA FC 250 250 2025
HUSQVARNA FC 250 250 2024
HUSQVARNA FC 250 250 2023
HUSQVARNA FC 350 350 2025
HUSQVARNA FC 350 350 2024
HUSQVARNA FC 350 350 2023
HUSQVARNA FC 450 450 2025
HUSQVARNA FC 450 450 2024
HUSQVARNA FC 450 450 2023
HUSQVARNA FE 250 250 2025
HUSQVARNA FE 250 250 2024
HUSQVARNA FE 350 PRO 350 2024
HUSQVARNA FE 350 350 2025
HUSQVARNA FE 350 350 2024
HUSQVARNA FE 450 450 2025
HUSQVARNA FE 450 450 2024
HUSQVARNA TC 125 125 2025
HUSQVARNA TC 125 125 2024
HUSQVARNA TC 125 125 2023
HUSQVARNA TC 150 150 2025
HUSQVARNA TE 150 150 2025
HUSQVARNA TE 150 150 2024
KTM 125 SX 125 2025
KTM 125 SX 125 2024
KTM 125 SX 125 2023
KTM 150 EXC 150 2025
KTM 150 EXC 150 2024
KTM 250 SX-F ADAMO EDITION 250 2025
KTM 250 SX-F 250 2025
KTM 250 SX-F 250 2024
KTM 250 SX-F 250 2023
KTM 350 EXC-F SIX DAYS 350 2025
KTM 350 EXC-F SIX DAYS 350 2024
KTM 350 EXC-F 350 2025
KTM 350 EXC-F 350 2024
KTM 350 SX-F 350 2025
KTM 350 SX-F 350 2024
KTM 350 SX-F 350 2023
KTM 450 EXC-F SIX DAYS 450 2025
KTM 450 EXC-F SIX DAYS 450 2024
KTM 450 EXC-F 450 2025
KTM 450 EXC-F 450 2024
KTM 450 SX-F 450 2025
KTM 450 SX-F 450 2024
KTM 450 SX-F 450 2023