Highsider CAN-BUS CBW1 Resistance

Increase the reliability of your motorcycle with the HIGHSIDER CAN-BUS CBW1 resistance

• Width: 40 mm
• Length: 46 mm

The HIGHSIDER CAN-BUS CBW1 resistance with DIP switch is an essential accessory for most vehicles equipped with a CAN-BUS system. By providing the necessary electrical load to your motorcycle, this resistance ensures that additional turn signals do not flash in the cockpit when the DIP switches are correctly set.

In addition to ensuring increased reliability, the CBW1 resistance detects any electronic failure of the additional indicators, immediately displaying an error message on the dashboard.

This resistance can handle up to 2 channels, meaning it can control the left and right rear turn signals, for example. If you need to change 2 pairs of indicators, you will need to use 2 CBW1 units.

To use the CBW1 on your motorcycle, it must either be equipped with original LED indicators or have a CAN-BUS system. If these conditions are not met, the resistance will not work. In this case, we recommend other suitable resistors based on the power of the indicators.

The CBW1 resistance offers the possibility to adjust different resistance values to suit your needs. Its compact dimensions (11mm in height, 31mm in width without the legs, 46mm with the legs, and 40mm in length) make it a discreet and easy-to-install accessory.

The connections are clearly identified to facilitate installation: Yellow = input channel 1 (+), Orange = output channel 1 (+), Blue = input channel 2 (+), Red = output channel 2 (+), Gray = input ground (-), Black = output ground (-).

Increase the safety and reliability of your motorcycle with the HIGHSIDER CAN-BUS CBW1 resistance. Don't let electrical problems disrupt your rides anymore and fully enjoy your ride in peace.