Many original bar ends have a diameter of 22.2 mm. Nowadays, manufacturers prefer to use 28.6 mm bridges to offer the more upmarket handlebars that customers are looking for.
You should therefore check the diameter of your current handlebars before making your choice.
It is still possible to fit your motorcycle or quad with original 22.2 bridges with handlebars made for 28.6 bridges. To do this, you'll need to consider the purchase of adapter bridges.
There are many models available, with varying heights. Be careful not to raise the cockpit too much when you're trying to lower it (or vice versa). You'll find our selection of adapter bridges here.
Riser bridges enable you to raise the height of your cockpit, and some even allow you to adjust the depth.
A booster cradle can also be adapted to ! In other words, you can go from 22mm to 28.6mm,
This means you can raise the bridle by 15, 25, 35, 40 or 55 mm, depending on your size.
We also offer half bridge adapters, so you can keep your upper bridges ! More economical,
Axle-mounted bridges are primarily designed for motorcycles. The YAMAHA YFZ450-R quad uses this system.
They allow you to change handlebar diameters and riding height.
These not only raise the helm position (from 50mm to 127mm), they also allow you to adjust the helm very precisely forwards or backwards. Combined with handlebar rotation, this system is the most interesting and complete in terms of adjustment possibilities!
This type of trigger guard is best suited to quads.
A pivot-mounted trigger guard can also be adapted to ! This means you can go from 22mm to 28.6mm, so you can mount 28.6mm aluminum handlebars on your machine.
These are 3-in-1 bridges: they are pivoting, raising and anti-vibration!
Mainly designed for quads
These bridges are mounted on independent silent blocks, making the 2 sides completely autonomous. Maximum shock absorption.
These ROX ELITE bridges will raise your cockpit by 508 mm.
They can be fitted to all 22mm bridges. 22mm or 28.6mm handlebars can be fitted with the supplied adapter shims.
Exclusively for RACING columns such as ART, HOUSER, LAEGER'S, PGS, TCR ....
Available for 22 or 28.6mm handlebars.
Silent blocks absorb vibrations and shocks.
Steering is very comfortable with a column + trigger guard assembly.
This type of trigger guard will raise your riding height by about 5cm compared with the original. If you're tall or ride a lot in the sand (or both), this type of assembly will be indispensable! A +25mm or +50mm column with racing bridges will allow you to go up by up to 10cm!
