XTREMEPARTS Front Brake Kit for YFZ450 / 700 Raptor with AVIA Brake Lines

EXTREMEPARTS XC GEOMETRY FRONT END

• Total Width +10 cm compared to the original
• XC Geometry: Curved lower arms
• Compatible with all YAMAHA YFZ450 and 700 RAPTOR
• Compatible with shock absorbers of original length and travel
• Satin black color / thick and resistant epoxy paint
• 100% reinforced steel, 10 times stronger than the original

The XC geometry is a huge advantage for endurance races or tough trail rides! Thanks to the curved shape of the lower arms, the front of the quad is higher than a classic front end, allowing it to pass over obstacles and/or avoid getting stuck! (The quad’s height obviously remains adjustable with your shock absorbers). Widely used by professional riders in extreme endurance and BAJA races...

Exclusive Adjustments: This EXTREMEPARTS XC front end offers all possible adjustments!

Thanks to its exclusive uniball joint system connecting the upper triangles to the chassis, the possibilities for caster and camber adjustments are endless! You can also adjust your camber via the ball joint at the end of the same triangle, providing a dual adjustment! No other classic front end offers this type of adjustment.

The lower triangles attach to the chassis axle using needle bearings, much more durable than the original Teflon bushings.

Delivered with ultra-reinforced OVERSIZE aluminum steering rods with a 12mm thread pitch. The steering ball joints must be reused from your old front end (not included), or you can purchase 2 new pairs here:

STEERING BALL JOINT

The kit is complete, ready to install, and includes:

• 2 Upper triangles
• 2 Lower triangles
• 2 Steering rods
• 2 Upper ball joints
• 2 Lower ball joints
• 4 Uniball joints + 8 spacers
• Grease fittings on the triangles
• Needle bearings mounted on the lower triangles
• Lower dust cover

During a wide front train assembly or a higher column, your original front brake hoses will be too short and therefore incompatible.

You will need longer hoses! Tonnycat offers you here to give your quad high performance braking with the TNC BRAKES AVIATION HOSE KIT 'T' SYSTEM BLACK SERIES +5cm.

This front hose kit consists of 3 hoses connected with a crimped 'T' distributor, offering optimal resistance and efficiency for dry and firm braking.

These hoses are 100% compatible with your wide train because they are longer than the original ones!

• High performance front hose kit for quad
• 'T' distributor specially designed for optimal pressure distribution
• Easy installation with instructions and banjo tightening torque included
• Reduces braking distances and eliminates pumping effects
• Abrasion and corrosion resistant for maximum durability

This TNC BRAKES AVIATION HOSE KIT 'T' SYSTEM BLACK SERIES will significantly improve the braking performance of your quad, offering you increased safety during your off-road rides. Do not hesitate and equip your quad with the best in braking!